New Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Rolls

New Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Rolls
New Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Rolls
New Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Rolls
New Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Rolls
New Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Rolls

New Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Rolls
Hot foil stamping machine + PVC Card Embossing Machine (with 2 free gold foil rolls). Hot Foil Stamper Parameters. 2 1/3″ x 3 1/2″ (60mm x 90mm). Up to 1 1/2 (40mm). 5 3/4″ x 4″ (150mm x 100mm). Foil Feed Length Adjustable. 0 – 2 1/3(0 – 60mm). 220V ± 10%, or 110 V ± 10%. Have the bronzing machine connected with DC, rotate the temperature adjustment knob to set the temperature of 100°C, and then turn on the power switch. Put the bronzing substances on the bronzing table, and then adjust the location ruler of the bronzing table to make the bronzing substances placed on the proper location of the heat conductive rubber or electric aluminum template with the bronzing surface facing up. Have the bronzing machine connected with DC, turn on the power switch and the red power indicator light is on, then rotate the temperature adjustment knob, and set the required temperature according to different materials and prints. The following table can be used as reference. The temperature control indicator light becomes red, and after more 10 minutes, it becomes green, which indicates that the heat transfer plate reaches the required temperature. Due to automatically constant temperature control, in the bronzing process, the indicator lights will often change the color, but this does not affect the bronzing effect. When the temperature control indicator light becomes green, use hands to move the handle to make the surface of the heat conductive rubber or electric aluminum template contacted fully with the surface of the bronzing substance. The required temperature varied from the different bronzing papers, if the temperature is too high, the boundary of the colored lines may be beyond the mark, even become indistinct, while if the temperature is not enough high, the coloring may not be uniform. For this arrangement, the temperature shall be adjusted according to the bronzing effect. Pressure and bronzing time: The too dark bronzing lines indicate that the surface pressure is too large, while the too light even incomplete bronzing lines suggest that the surface pressure is too small; and if the bronzing time is too long, the bronzing coloring will be beyond the mark, even become indistinct, while if the bronzing time is too short, the coloring will not be uniform. The smooth surface of prints requires a smaller pressure and a shorter bronzing time, while the rough surface of prints requires a larger pressure and a longer bronzing time. Adjust the height limit nut to limit the pressing and bronzing height, and avoid the collision and damage among the word surface, the surface of the heat transfer plate and the bronzing surface due to using large strength to pull the handle. To save the foil paper, it is possible to adjust the length adjustment knob of the foil paper according to the length of the bronzing surface, so that the paper-advance length per time is suitable for the length of the bronzing surface. After tried India to be good may start officially to burn India. After volume tin foil burns India to use, gyrates receives the paper axis knob to cause red to instruct the knob faced the tin foil which on was allowed upwardly to take out causes to use up. PVC Card Embosser Parameters. Normative PVC card, 85.5mm × 55mm (3-3/8″ x 2-1/8″). Pin point and sample card. 1/7 inch or 1/10 inch (for smaller characters). Internal 68 Codes & Characters. Capitalization case of English letters (26)AZ. Capitalization & Lower Arabic numerals (20)09. Modify splanishing symbols(2) (1 for Small Characters, 1 for Large Characters). 1Machine; I Set of tool, 1Sample, 1 English User Guide. 339mm x 269mm x 165mm. 80mm x 120m(3.15 inch x 393.7 feet) / roll. Stamping on both paper, leather, plastic, cloth, PVC cards, etc. A Protected from pressure, dampness, heat, and sunshine. B Place in ventilated, shaded and cool places. 1 hot foil stamping machine with parts. 1 PVC card embossing machine with parts. 2 foil rolls(gold color). We will respond as soon as possible. If you do not hear from us, please check your junk or spam mailbox. Track Page Views With. Auctiva’s FREE Counter. The item “New Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Rolls” is in sale since Saturday, July 01, 2017. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Stamping & Embossing”. The seller is “willbeallright” and is located in hk. This item can be shipped worldwide.
  • Brand: wd
  • Model: wdet
  • MPN: Does Not Apply

New Manual Hot Foil Stamping Tipper Bronzing+PVC Card Embossing Machine+2 Rolls